Dual Paddle Shifter/Clutch Module V1.5

13 April 2023 | Hits: 8913 | Downloads: 923 | Sim Gear | Free | Digital

0
Shares

  • 4.6
    7 votes

Featured Projects

Featured Brands

    • Edited the MPM design to make it up to date with my newest single shifter design. Now it features:

      Shorter paddle throw on all three paddles

      More stable Fanatec mount with additional support

      Replica of the original APM paddles

       

      Of course with the shorter throw you will have to bend a little the switches metal arm (see video for reference).

       

      Now with the shorter throw it feels even better. Have not tested, but clutch has 2 degrees less rotation and now should utilize better the whole throw.

       

      All parts and assembly remain the same.

    • Parts needed:

      1. Neodym Magnets 15x4mm - 14-16x (depending if you want more magnets on shifter for stronger feel)
      2. Omron micro switch or clone (Micro Switch 2/3Pin NO/NC Mini Limit Switch) with straight handle - 4x
      3. M3 Standoffs (columns, rods, struts, spacers for RC),  (o.d. 5mm), 18mm long - 12x
      4. M3 Alu washers for slick look (Countersunk Head Bolt Washers Gasket), not so needed - 8x
      5. M3 countersunk screws for clutch side assembly, I used 16mm ones - 4x
      6. M3x50mm countersunk screws - for shifter assembly, they hold together the three standoffs in row - 4x
      7. M3x12 round head screws for shifter and clutch paddles, mounting baseplate - 12x
      8. M2 screws for switch mounting, at lease 16mm - 8x
      9. M3 nuts for holding mount plate
      10. M3 brass 3D print inserts, 4.2mm o.d., 6mm length - for paddles/flat base - 12-20x
      11. Magnetic Hall Sensor SS49E - 2x

      Included are two mounting options - Fanatec hubs/wheels and flat button plate (bottom mounted).

    • Comments (7)

      Leave a comment

      Please login to leave a comment.

    License

     
    This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
    .