-
Pro version of the 57SEQ MK-I Shifter, only for PRO tier members! Same as the other, but simply more as a thank you for the extended support!
Actually, it has only one addition - Neutral Gear Lever. All the rest is the same together with the newest upgrades:
- Neutral Gear Lever
- Improved Roller design for stability - now it can worn reliably with stiffer springs
- Full size sequential shifter
- Double stage release - initial higher resistance, then sudden release till ends-stop
- Easily changed resistance by switching springs
- Cam plate can be modified to different travel-relase-resistance
- Quiet - being printed part is family/neighbour friendly
- Big flange M8 ball bearings and 3030 series profile make it very solid
- Easily mountable to all kind of rigs/deskbrackets
- Relies on cheap and easily obtainable non-printed parts
- Lever uses M8 mounting hardware compatible with most aftermarket shifter knobs
- Three different handles - Small, Large (both longer and thicker) and adapter for standard MTB Grips
- Brass fittings on the main lever - act as guides for the spring rod for extra stability and smoother operation - shifter has zero play in the mid point
-
Pats list:
N.B. - Prices are with VAT and Shipping as I ordered at the time the project was published. Some items i bought in bulk, so % of actually needed parts was adjusted to give you idea of the final price of the non-printed parts needed for this project.
Print Settings:
Use more than 5 walls, 25% Gyroid infill, 0.2 layer. PETG for stability, PLA will also work. Parts oriented in the way that should be printed. Only parts needing support are the side mounts and microswitch holders.
For best results I ended up using PLA+ (Sunlu PLA+ 2.0), 9 walls/bottom/top, 45% Gyroid infill.
Comments (0)